• UIKit
  • SDK
  • 서버 API
Chat/
서버 API/
RESTful 인터페이스/
그룹 관련/
그룹 관리/
서버 API
  • RESTful 인터페이스
    • RESTful API 개요
    • RESTful API 목록
    • 메시지 관련
      • 메시지 보내기
        • 단일 사용자에게 1대1 메시지 보내기
        • 여러 사용자에게 1대1 메시지 보내기
        • 그룹 내 일반 메시지 보내기
        • 그룹 내 시스템 메시지 보내기
        • 라이브 방송 그룹 브로드캐스트 메시지
        • 1대1 메시지 가져오기
        • 그룹 메시지 가져오기
      • 과거 메시지
        • 과거 1대1 메시지 수정
        • 과거 그룹 메시지 수정
        • 1대1 과거 메시지 풀링
        • 그룹 과거 메시지 풀링
      • 메시지 삭제
        • 지정 사용자가 보낸 메시지 삭제하기
      • 메시지 철회
        • 1대1 메시지 철회
        • 그룹 메시지 철회
      • 읽음 확인
        • 1대1 메시지 읽음 설정
        • 그룹 메시지 읽음 확인 상세정보 풀링
        • 그룹 메시지 읽음 확인 풀링
      • 메시지 확장
        • 1대1 메시지 확장 풀링
        • 1대1 메시지 확장 설정
        • 그룹 메시지 확장 풀링
        • 그룹 메시지 확장 설정
      • 모든 사용자에게 푸시하기
        • 전원 푸시 인터페이스
        • 모든 사용자에게 푸시하기
        • 애플리케이션 속성 이름 설정
        • 애플리케이션 속성 이름 획득
        • 사용자 속성 획득
        • 사용자 속성 설정
        • 사용자 속성 삭제
        • 사용자 태그 획득
        • 사용자 태그 추가
        • 사용자 태그 삭제
        • 사용자 모든 태그 삭제
    • 대화 관련
      • 대화 목록
        • 대화 목록 풀링
      • 읽지 않은 대화 수
        • 멤버의 읽지 않은 메시지 수 설정
        • 읽지 않은 1대1 메시지 수 조회
      • 대화 삭제
        • 대화 삭제
      • 대화 그룹 태그
        • 대화 그룹 데이터 생성
        • 대화 그룹 데이터 업데이트
        • 대화 그룹 데이터 삭제
        • 대화 마크 데이터 생성 또는 업데이트
        • 대화 그룹 마크 검색
        • 대화 그룹 마크 데이터 풀링
    • 그룹 관련
      • 그룹 관리
        • 애플리케이션 내 모든 그룹 획득
        • 그룹 생성
        • 그룹 해체
        • 사용자가 가입한 그룹 획득
      • 그룹 정보
        • 그룹 정보 획득
        • 그룹 정보 수정
        • 그룹 정보 가져오기
      • 그룹 멤버 관리
        • 그룹 멤버 추가
        • 그룹 멤버 삭제
        • 그룹 멤버 금지
        • 그룹 멤버 금지 해제
        • 일괄 음소거 및 음소거 취소
        • 음소거된 그룹 멤버 목록 획득
        • 그룹 오너 변경
        • 그룹 내 사용자의 신분 조회
        • 그룹 멤버 가져오기
      • 그룹 멤버 정보
        • 그룹 멤버 정보 획득
        • 그룹 멤버 정보 수정
      • 그룹 사용자 정의 속성
        • 그룹 사용자 정의 속성 획득
        • 그룹 사용자 정의 속성 수정
        • 그룹 사용자 정의 속성 비우기
        • 그룹 사용자 정의 속성 리셋
        • 그룹 사용자 정의 속성 삭제
      • 라이브 방송 그룹 관리
        • 라이브 방송 그룹 온라인 인원수 획득
        • 라이브 방송 온라인 멤버 목록 획득
        • 라이브 방송 그룹 멤버 마크 설정
        • 금지된 멤버 목록 획득
      • 커뮤니티 관리
        • 화제 생성
        • 화제 삭제
        • 화제 정보 획득
        • 화제 정보 수정
        • 화제 정보 가져오기
      • 그룹 카운터
        • 그룹 카운터 획득
        • 그룹 카운터 업데이트
        • 그룹 카운터 삭제
    • 사용자 관리
      • 계정 관리
        • 단일 계정 가져오기
        • 다중 계정 가져오기
        • 계정 삭제
        • 계정 조회
      • 사용자 정보
        • 정보 설정
        • 정보 풀링
      • 사용자 상태
        • 계정 로그인 상태 무효화
        • 계정 온라인 상태 조회
      • 친구 관리
        • 친구 추가
        • 친구 가져오기
        • 친구 업데이트
        • 친구 삭제
        • 모든 친구 삭제
        • 친구 인증
        • 친구 풀링
        • 지정 친구 풀링
      • 친구 목록
        • 목록 추가
        • 목록 삭제
        • 풀링 목록
      • 블록리스트
        • 사용자 블록리스트 추가
        • 사용자를 블록리스트에서 제거
        • 블록리스트 풀링
        • 블록리스트 내의 사용자 인증
    • 전원 음소거 관리
      • 전원 음소거 설정
      • 전원 음소거 조회
    • 운영 및 유지관리
      • 운영 및 유지관리 데이터 풀링
      • 최신 메시지 다운로드
      • 서버 IP 주소 획득
    • 챗봇
      • 챗봇 계정 풀링
      • 챗봇 계정 생성
      • 챗봇 계정 삭제
    • All/Tagged Push
      • Pushing to All/Tagged Users
      • Obtaining Application Attribute Names
      • Setting Application Attribute Names
      • Obtaining User Attributes
      • Setting User Attributes
      • Deleting User Attributes
      • Obtaining User Tags
      • Adding User Tags
      • Deleting User Tags
      • Deleting All User Tags
      • Recalling Push
  • 트리거
    • 콜백 개요
    • 콜백 명령 목록
    • 콜백 운영 및 유지관리
      • 인터페이스 오버클록킹 알람 콜백
    • 온라인 상태 콜백
      • 상태 변경 콜백
    • 관계망 콜백
      • 정보 업데이트 후
      • 친구 추가 전
      • 친구 추가 응답 전
      • 친구 추가 후
      • 친구 삭제 후
      • 사용자를 블록리스트에 추가한 후
      • 사용자를 블록리스트에서 제거한 후
    • 1대1 메시지 콜백
      • 1대1 메시지 보내기 전
      • 1대1 메시지 보낸 후
      • 1대1 메시지 읽음 설정 후
      • 1대1 메시지 철회 후
    • 그룹 콜백
      • 그룹 생선 전
      • 그룹 생성 후
      • 그룹 가입 신청 전
      • 사용자를 그룹에 초대하기 전
      • 사용자 그룹 가입 후
      • 멤버 탈퇴 후
      • 그룹 메시지 보내기 전
      • 그룹 메시지 보낸 후
      • 그룹 만원 후
      • 그룹 해체 후
      • 그룹 정보 변경 후
      • 그룹 메시지 회수 후 콜백
      • 라이브 방송 그룹 멤버 온라인 및 오프라인 상태 콜백
      • 그룹 메시지 보내기 이상 콜백
      • 화제 생성 전
      • 화제 생성 후
      • 화제 삭제 후
      • 화제 정보 변경 콜백
      • 그룹 멤버 정보 변경 후 콜백
      • 그룹 속성 변경 후 콜백
      • 읽음 확인 후 콜백
      • 그룹 오너 변경 후 콜백
      • Group Creation Daily Net Increase Threshold Alarm Callback
이 페이지는 현재 영어로만 제공되며 한국어 버전은 곧 제공될 예정입니다. 기다려 주셔서 감사드립니다.

애플리케이션 내 모든 그룹 획득

Feature Overview

This API is used by the app admin to obtain the IDs of all groups in an app.

API Calling Description

Applicable group types

Tencent Cloud Chat provides different types of built-in groups. For more information, see Group System.

Sample request URL

https://xxxxxx/v4/group_open_http_svc/get_appid_group_list?sdkappid=88888888&identifier=admin&usersig=xxx&random=99999999&contenttype=json

Request parameters

The following table describes the modified parameters when this API is called. For other parameters, see RESTful API Overview.
Parameter
Description
xxxxxx
Domain name corresponding to the country/region where your SDKAppID is located.
China: console.tim.qq.com
Singapore: adminapisgp.im.qcloud.com
Seoul: adminapikr.im.qcloud.com
Frankfurt: adminapiger.im.qcloud.com
Silicon Valley: adminapiusa.im.qcloud.com
Jakarta: adminapiidn.im.qcloud.com
v4/group_open_http_svc/get_appid_group_list
Request API
sdkappid
SDKAppID assigned by the Chat console when an app is created
identifier
App admin account. For more information, see the App Admin section in Login Authentication.
usersig
Signature generated by the app admin account. For details, see Generating UserSig.
random
A random 32-bit unsigned integer ranging from 0 to 4294967295.
contenttype
Request format, which should always be json.

Maximum call frequency

1 times/second

Sample request

Basic format If the total number of groups in the app exceeds 10,000, a maximum of 10,000 group IDs are returned. To obtain all group IDs, you must pull them by page.
{}
Pulling by page You can use the Limit and Next fields to control the paged pulling:
The Limit field specifies the maximum number of groups in GroupIdList in the response packet, which cannot exceed 10,000.
The Next field is used to control pagination. For the initial pagination request, Next is set to 0. For subsequent requests, it is set to the previously returned Next value. If the returned Next value is 0, all groups have been pulled. For example, if paged pulling is requested and 20 group IDs are displayed per page, the request parameters for the first page are {“Limit” : 20, “Next” : 0}, whereas those for the second page are {“Limit” : 20, “Next” : Previously returned Next value}, and so on.
The value of Limit or Next does not affect TotalCount in the response packet.
{
"Limit": 1000,
"Next": 0
}
Specifying the group type You can specify the type of groups to be pulled, such as Public, Private, ChatRoom, AVChatRoom, or BChatRoom.
{
"GroupType" : "Public" // Type of groups to be pulled. If this parameter is not specified, all types of groups will be pulled.
}
ALL IN ONE
{
"Limit": 1000,
"Next": 0,
"GroupType" : "Public" // Type of groups to be pulled. If this parameter is not specified, all types of groups will be pulled.
}

Request fields

Field
Type
Required
Description
Limit
Integer
No
Maximum number of group IDs to be obtained, which cannot exceed 10,000. If no value is specified, the maximum value 10000 is used by default.
Next
Integer
No
Paged pulling flag when the number of groups is too large. It is initially set to 0 and subsequently to the Next value returned in the previous response. If the returned Next value is 0, all groups have been pulled.
GroupType
String
No
To obtain a specified type of groups, you can use GroupType for filtering. In this case, the returned TotalCount value indicates the total number of groups of the specified type in the app. If this field is not specified, all types of groups are obtained.
Possible group types are Public, Private, ChatRoom, AVChatRoom, BChatRoom, and Community.

Sample response

{
"ActionStatus": "OK",
"ErrorInfo": "",
"ErrorCode": 0,
"TotalCount": 2,
"GroupIdList": [
{
"GroupId": "@TGS#2J4SZEAEL"
},
{
"GroupId": "@TGS#2C5SZEAEF"
}
],
"Next": 4454685361
}

Response fields

Field
Type
Description
ActionStatus
String
Request result. OK: successful; FAIL: failed
ErrorCode
Integer
Error code. 0: Successful; other values: Failed
ErrorInfo
String
Error information
TotalCount
Integer
Total number of existing groups in the app. To obtain a specified type of groups, you can use GroupType for filtering. In this case, the returned TotalCount value indicates the total number of groups of the specified type in the app. If this field is not specified, all types of groups are obtained.
For example, assume that the app has total 50,000 groups, including 20,000 public groups. If GroupType in the request packet is set to Public, TotalCount in the response packet is 20,000 regardless of the Limit and Offset values. In addition, groups in GroupIdList are all public groups.
GroupIdList
Array
List of obtained group IDs.
Next
Integer
Paged pulling flag.

Error Codes

The returned HTTP status code for this API is always 200 unless a network error (such as error 502) occurs. The specific error code and details can be found in the response fields ErrorCode and ErrorInfo respectively. For public error codes (60000 to 79999), see Error Codes. The following table describes the error codes specific to this API:
Error Code
Description
10002
Internal server error. Try again.
10004
A parameter is incorrect. To correct it, check request parameters such as GroupType based on the error description.
10007
The operator does not have the necessary permissions for this operation. Only the app admin can call this API.
10018
The response packet exceeds the length limit of 1 MB due to excessive request content. Try to reduce the amount of data in individual single requests.

API Debugging Tool

Use the RESTful API online debugging tool to debug this API.

References

Getting the Groups a User Has Joined (v4/group_open_http_svc/get_joined_group_list)
커뮤니티에 질문하십시오!
기술적인 논의를 시작하고 즉시 전문가 지원을 받으세요!